Category Archives: Modification

MT5900/6000 module ver.2.0

Microprocessor module MT-5900/6000 for the White’s detectors series 5900/6000. Allows to receive 1 audio tone or 4 audio tones or multitone program(11-tones): Mode: 1T: – one audio tone 412Hz Mode: 3T: – 208Hz tone for VDI less than 5 –

MT5900/6000 module – assembly diagram for White’s XL PRO

The figure shows PCB White's XL PRO. A - Pin7 U25-TL064 DC_VDI B - Pin(-) C87-470nF -7.5V C - Pin(+) C90 GND D - Pin9 U9-HCF4053 AG cut the wire on PCB! E - Pin(+) C87-470nF +7.5V F - Pin11

Modification of the MXT transmitter #2

Here we have the measurement of the old transmitter MXT PRO: Here we have the measurement of a modified transmitter MXT PRO: The transmitter current increased by 30 per cent – blue signal. Yellow signal (Vpp)  – TX Blue signal

Modification of the MXT transmitter

Modification allows you to increase the depth of coin detection by two inches. The MXT transmitter has very good properties. However, in the new model MX sport produces a much larger magnetic field. Modification of the MXT transmitter allows to

DLCD-5900/6000 module for the White’s detectors series: 5900/6000

Microprocessor module DLCD-5900/6000 for the White’s detectors series: 5900/6000. The module works with the module MT-5900/6000 (only version 2.0 software). This is new software with mode:static or motion discrimination functions. The module DLCD-5900/6000 allows display: – VDI(signagraph) and number VDI(range

Microprocessor module MT-5900/6000 for the White’s detectors series 5900/6000.

MT-5900/6000 Data brief EN © 2016 TAKTYK DETEKTORY METALI – All rights reserved taktyk@taktykpulse.com.pl Microprocessor module MT-5900/6000 for the White’s detectors series 5900/6000. Allows to receive 4 audio tones: – 208Hz tone for iron (IRON) – 412Hz tone for the